Full face mask with communication feature:
• Made of silicone, which provides comfortability to wearer and will not cause skin allergies
• The face window of the mask is molded using impact-resistant high-strength polycarbonate material, and coated with a wear-resistant layer on the surface
• Provides high light transmittance and no distortion, providing clear visibility for wearer
• Equipped with an aramid head net and five-strap head-harness to evenly distribute pressure on the head and increase comfort
• Comes with a built in communication system (including microphone, speakers, loudspeakers, call buttons, and cable communications receivers) to facilitate communication while performing mission or tasks
• HUD (Heads-Up Display) to provide wearers a visual display of their SCBA air status without requiring them to divert their attention from their tasks
SAFETYWARE Premium SCBA with 6.8L composite cylinder
SAFETYWARE Premium SCBA with 6.8L composite cylinder
ITEM CODE : SCBA-PR68
- Open circuit, self-contained, compressed air breathing apparatus.
- Specifically designed as a professional fire fighting SCBA
- Suitable for providing respiratory protection in an immediately dangerous to life or heath atmosphere.
- Consists of a full facemask, back plate, carrying harness and a 6.8L 300 Bar carbon composite cylinder.
- Comes with a cylinder connector, pressure reducer, pressure gauge, warning whistle and lung demand valve.
Visit our online stores:
Specification
| Material | Face mask: Silicone, polycarbonate, aramid head net Harness: Fire retardant material Cylinder: Composite Cylinder valve: Nickel plated brass Demand valve hose fitting: Stainless steel Hose and O-ring: EPDM |
| Air Cylinder | 6.8L |
| Working Duration | 60min |
| Weight | 11.5kg (empty composite cylinder) |
| Working Temperature | -30 ˚C to 60 ˚C |
| Dimension | 710mm x 440mm x 300mm |
Instruction
Donning:
1. Slide arms through the shoulder straps.
2. Stand up straights; Pull down on the shoulder strap to tighten for a snug fit.
3. Fasten the waist buckle and pull forward on the waist strap to tighten for a snug fit.
4. Grab the lung demand valve and push the side buttons to insert the valve into the mask.
5. Connect the hose from the valve to the intermediate pressure hose coupling.
6. Place the strap over your neck.
7. Open the cylinder valve and check the pressure gauge, make sure the pressure is over 270 bar.
8. Put on the mask; Pull the head straps for a secure fit.
Doffing:
1. Take off the face mask.
2. Press the red button of the lung demand valve.
3. Unfasten the waist buckle.
4. Lay the cylinder horizontally on a flat surface (ie. Table, carrying case, ground). Close the valve of the cylinder at clockwise direction.
5. Press the ‘on’ button of the lung demand valve to let air out from the hose. Check the pressure gauge, the pressure will drop to 0.
6. Clean the breathing apparatus with a damp cloth and store it in itscarrying case.
Standard
EN 137:2006 & EN 136:1998+AC:2003
