- Honeywell BW™ Solo features:
- Access it from any device with an internet connection.
- Get remote visibility on worker safety and location.
- Share gas data with the desktop software.
- Option to activate IntelliFlash™ or non-compliance flash
- Ability to assign detectors to workers and locations
- Easy-to-read display for multiple languages
- Data logging with rolling 24-hour peak reading
Honeywell BW™ Solo
Honeywell BW™ Solo
Item Code : BWS2AY
Target Gas : CO, H2S and O2.
Humidity : 0% – 95% RH (non-condensing)
Typical Battery Life:12 months (6 months for 1-Series O2)
Certified to FCC ID, IC, RED, ATEX , IECEx etc.
Visit our online stores:
Additional information
| Item Code / Gas Type | Item Code ; Gas Type |
|---|
Technical Data
| Honeywell BW SOLO | ||
|---|---|---|
| Size | 2.7 x 2.6 x 1.4 in. / 7.0 x 6.7x 3.6 cm (1-Series sensor models) 2.7 x 2.6 x 1.6 in. / 7.0 x 6.7x 4.1 cm (4-Series sensor models) |
|
| Weight | 3.6 to 4.1 oz. / 103 to 116 g, | |
| Ingress Protection | P66/68 | |
| Humidity | 0% – 95% RH (non-condensing) | |
| Alarms | Visual, vibrating, audible (95 dB) • Low, High, TWA, STEL non-compliance | |
| Test | Audible/visual alarms on activation; sensors, battery and circuitry (continuous) |
|
| Typical battery life | 18 hours; recharges in less than 6 hours Note: Approximately 20% capacity loss is normal with lithium polymer batteries after 500 charge cycles. Refer to the Operator’s Manual for additional information. |
|
| Self Test | Sensor integrity, circuitry, battery and audible/visual alarms on activation; battery (continuous) |
|
| Typically Battery Life | 12 months (6 months for 1-Series O2) | |
Certification
- Class 1, Division 1, Groups A, B, C, D T4
- Sira 18ATEX2243 X 2460 g II 1G Ex ia IIC T4 Ga
- IECEx SIR 18.0058 Ex ia IIC T4 Ga / Ex ia I Ma-40°C≤Tamb ≤ 60°C
- FCC ID: SU3BWS1
- IC: 20969-BWS1
- RED: RE-D Directive 2014/53/EU
